D-LINK EXTENDER LOGIN

Bothered with http://dlinkap.local not connecting error? Check out this quick guide to alleviate the D-Link extender login failed issue. http://dlinkap.local is login web page that allow users to get into D-Link extender login page. In case, your D-Link extender login not working, you can use a default IP address 192.168.1.1.

D-Link extender is best known to cover dead zones of your home. To extend your wireless network, you just need to install D-Link extender. Access D-Link extender login page on a device connected to D-Link network using the web domain http://dlinkap.local.

Afterwards, you only need to provide the default login credentials. Sometimes, you can encounter D-Link extender login not working. This could happen due to number of factors. Refer to the following section to know how to resolve D-Link login failed error.

HTTP://DLINKAP.LOCAL NOT CONNECTING

Sometimes, users face a common issue which is D-Link extender login failed error. There are number of factors that could cause D-Link login problems. You can use 192.168.1.1 to sign into D-Link extender setup wizard. If you are unable to log in using http://dlinkap.local as well as 192.168.1.1 then you need to try some troubleshooting methods.

HOW TO FIX D-LINK EXTENDER LOGIN NOT WORKING?

The best placement for the extender is between the wireless router and the Wi-Fi clients you are connecting to the router. You may even connect the extender close to your router and then position it where you want.

Dlinkap.local

Check the cable connection

The most common reason that cause http://dlinkap.local not working issue is improper cable connection. Therefore, you must ensure that your extender is properly connected to router. Next, you must also check the power connection.  Make sure that the electrical outlet to which D-Link router is connected is working properly. If not, plug your device into another power outlet.

D-Link Extender Setup

Disable Anti-virus and malware software

If your computer have anti-virus or internet security software, you must disable them for a while.  Sometimes, these security software stops you from accessing D-Link extender login page. After disabling the security software; check if you can access the D-Link login page or not. If not, continue with other troubleshooting methods.

D-Link Extender Login

Check the d-link login details

In case, you’ve entered incorrect D-Link extender login details, your will not be able to get into web management of the extender. The default web address to get into D-Link extender is http://dlinkap.local. You can find the default login details on the label of your device. You can  use 192.168.1.1 ip address for D-Link extender login.

How To Update D-Link Extender Firmware

Update d-link extender firmware

It is important to have updated firmware for your D-Link extender. If you are using an outdated firmware, you can face issues while signing into D-Link extender. You can update D-Link extender firmware by downloading it from the D-Link support. Once you complete updating D-Link firmware, you can try signing into D-Link device.

Reset D-Link Extender

Reboot your Network

Remove your device from the power source. Disconnect your D-Link extender. Now, disconnect your router. Disconnect the modem. Turn off computer. Wait for 1 minute. Now, turn the device back ON  one by one. This will troubleshoot http://dlinkap.local not connecting error.

Dlinkap.local not working

Reset your d-link device

In case you are still having issues while getting into D-Link router, you can perform a quick reset process on the router. You will have to press the reset button for a few seconds by using a pointed object such as paper clip or a pen. Release the button once you witness a change in the behavior of lights.

troubleshooting methods will help you avoid and resolve d-link extender login not working

D-Link extender login using dlinkap.local web address is not difficult but it can be confusing. If you are trying to sign into D-Link extender for the first time, you might face some issues. With easy steps, you can get into D-Link extender.

TO SIGN IN TO D-LINK EXTENDER, FOLLOW THE STEPS:

  • Firstly open up a browser on a device that is connected to D-Link network.
  • Then input http://dlinkap.local web address.
  • Next provide the D-Link extender login details- username and password.
  • Then click on the ‘Login’ option.
  • This will redirect you to the D-Link extender setup wizard.
  • Then you can extend your home network by connecting to your router.
  • Now change the D-Link extender wireless settings.
  • Then click ‘Save’ to apply the changes.
D-Link Extender Not Working

For more details on http://dlinkap.local not connecting, contact our technical team. Give them a call on their toll free number. You can do a live interaction with our team. Our technical is available 24/7 provide you help with D-Link extender login.

FAQ’S

HOW CAN I CHANGE THE WIRELESS CHANNEL ON MY D-LINK DAP EXTENDER?
  • Open an internet browser and enter https://d-linkap.com in the address bar.
  • Type your router password in the Password field.
  • Click the Setup at the top of the page and click Wireless Setup from the menu.
  • Click Save Settings to save your configuration.
HOW CAN I CONNECT MY IPHONE TO MY D-LINK DAP EXTENDER?
  • Click on the Settings icon on your iPhone.
  • Click to open the Wi-Fi settings.
  • Select the Wi-Fi network you want to connect by choosing the Wi-Fi name from the list.
  • If you have Wi-Fi passwords set up on your extender, enter the password and click to join.
  • The iPhone is connected to your wireless network.
CAN I CONNECT MY IPAD TO MY D-LINK DAP EXTENDER?
  • Click the Settings icon on your IPad.
  • Open the Wi-Fi menu and turn on the Wi-Fi.
  • Select the Wi-Fi network you want to connect to by clicking on the Wi-Fi name.
  • If you have a Wi-Fi password set up on your extender, enter the password and click on join.
  • You are now connected to the wireless network.
GUIDE FOR HOW CAN I CONFIGURE SHAREPORT WEB ACCESS ON MY D-LINK DAP EXTENDER?
SharePort Web Access allows you to access your favourite videos, music, and photos on a connected USB drive wirelessly from your Tablet or Smartphone.
  • Open an internet browser and type https://d-linkap.com in the address bar.
  • Enter your router password in the Password field.
  • Click on the Setup tab at the top of the page, and then click Storage from the menu on the left side.
  • Check Enable SharePort Web Access and make note of the HTTP Access Port. This port will be needed to access the SharePort Web Application.
  • Open a new web browser and enter https://d-linkap.com in the address bar.
  • Enter your username and password.
  • Your media will be categorized according to media type.